Improperly or poorly seated cabling: Try reseating the data cables that connect the drive and its controller at both ends.
Hard drive failure: Run the built-in diagnostics on the hard drive. Remember: Code 7 signifies correctable data corruption, not disk failure.
Improperly configured BOOT. Run a complete memory and hard drive diagnostic. The quick test is not thorough enough here. You need to run the full system diagnostic. If none of the above solves the issue, reinstall Windows. If that does not fix the issue, replace the hard drive. They have identical troubleshooting and resolution steps, and you will probably need to use the Windows Debugger to find out what caused the error.
Things to check If the Blue Screen message mentions a driver or library file, figure out what driver or application that file is part of and update or disable it. Update the system BIOS to the latest available revision. Uninstall any recently installed programs, and roll-back any recently installed drivers. Run diagnostics on the computer's memory. This is typically due to: A driver trying to access a page of memory that is not present A system service ex. Things to check If the Blue Screen error mentions a driver or library file, figure out what driver or program the file is a part of and either upgrade to the latest version or uninstall the driver or program.
If the error happens during the startup process, try booting to the Last Known Good Configuration. If the error started appearing after a program or driver was installed, uninstall that program or driver. Try running a full hard drive and memory diagnostic after reseating the memory and hard drive data cables. The goal of your troubleshooting is to find that driver and either disable or replace it. Use the Windows Debugger to troubleshoot this error.
Without the debugger, you are limited to uninstalling, updating, or rolling back the driver that contains the driver file the Blue Screen mentions. Things to check: Ensure that the video drivers are updated to the latest Dell version.
The system BIOS is fully up to date. If both the video driver and the system BIOS are fully up-to-date, check with the manufacturer for recent driver updates. As a last resort, try exchanging the video card. Reinstalling Windows is not likely to prevent this error from reoccurring. Using the Windows Debugger The Windows Debugger is one of the primary tools that are used by Microsoft software developers and support staff to analyze and resolve errors that result in memory dumps.
Before you can use the tool, keep in mind the following: The Windows Debugger is not a native Windows tool. You must download and install the application 15 MB from the Microsoft web site. Administrator access is required to install the tool. The Debugger requires some minor customization before use.
The Debugger can take anywhere from 30 seconds to two minutes to fully analyze a memory dump. To use the tool, follow these steps: Download and install the Windows Debugger from the Microsoft Web Site If you use Google to search for "windows debugger," the first result will be the Windows Debugger home page.
NN is the sequence the dump files were created in if multiple dumps were generated on the same day the first crash dump on a given day will be numbered 01, the second 02, etc. The first time that you use the Debugger to open and dump file on a system, it will take a few minutes to download symbol information in the background before it returns any information. The results will be lengthy, and you may have to scroll vertically within the Debugger's window to locate all the pertinent information.
Rate This Article Accurate not accurate. Therefore, it is necessary to delete all system memory dump files on a regular basis in order to avoid any errors. Start by clicking Start, then click Control Panel. Select Advanced system settings from the System menu, then double-click it. You can find Settings under Startup and Recovery under the Advanced tab. You can find the Small memory dump 64k information in the Write debugging information list. You can find the Settings option in Startup and Recovery.
There is a new window. You can select Complete memory dump from the dropdown menu and modify the dump file path as necessary under the Write debugging information section. The system will be restarted after you click OK. Click Advanced system settings on the left side of the window to open an Advanced tab once Crash Dumps has been turned off. Then click on the Settings button under Startup and Recovery.
Click on the none option in the drop-down menu that appears directly below to disable crash dumps. You will then be prompted to click OK. Software Development. To display trending posts, please ensure the Jetpack plugin is installed and that the Stats module of Jetpack is active.
Refer to the theme documentation for help. Share Tweet. Table of contents 1. What Is Crash Dump Windows7? What Causes Crash Dump? Ensure that drivers are up to date. Updates need to be installed. Start up the repair process again.
It is necessary to restore the system. Make sure memory or hard disk errors are fixed. The master boot record needs to be fixed. Windows 7 must be reinstalled. Temp files need to be cleared.
Become a superuser.
